It’s can feel pretty much impossible to have a clean garage floor. No matter how hard you try, there will always be a stain somewhere ruining everything by existing.
But, the good thing is that there is a solution to this very annoying problem, and that’s Epoxy coating!
Epoxy is super durable, so nothing will be able to tear it down making it one of the best types of floorings to go into a garage floor!
But the question lies here, how exactly do you apply epoxy coating on your floor? Well, you could take the super-easy way and just call in Epoxy Coating Contractors NJ or a reliable contractor in your local area, or, do it all yourself!
While other types of floorings might come with a mountain of information to go through, this one doesn’t! With just a little bit of help and the right guide, you can easily epoxy coat your garage floor by yourself!
Still don’t have faith in yourself? Well, not for long! In this post, we’re going to guide you through the whole process so you can go into that garage knowing exactly what you need to do to revamp the flooring!
How to Epoxy Coat Your Garage Floor
Here’s everything you need to know about epoxy coating your garage floors!
Step 1. Clean the floor
Before you even start actually applying the epoxy, you need to thoroughly clean your garage floor. You should wet the floor and then go in with a broom. It’ll dislodge any stubborn dirt off the floor. Then use a wet-dry vacuum to clean the debris that might be hiding in plain sight.
You can remove all the grease on the floor using a degreaser as well as a stiff brush, and rinse off.
Once you’ve cleaned the whole floor, wait until the floor is fully dry for at least 4-ish hours before you move on to the next step!
Step 2. Etch your flooring
After the floor is done drying, you’ll need to etch the floor. To etch the floor, you’ll have to use the etching solution which you should get with the epoxy coating kit.
Make sure to mix the etching solution with water before pouring it all over the floor. After you’ve poured it, use a broom or a stiffer brush to really work it in.
There should be a bunch of foam everywhere and will slowly abrade the surface of your garage floor.
After working in the etching solution, rinse the whole area using a garden hose then wait for it to dry. It can take days for the garage floor to fully dry after this, so be patient!
Step 3. Make the Epoxy paint
Now that you’ve done all the prep work, you can finally get to the actual epoxy part!
Start by preparing the epoxy. Mix the catalyst and resin. After emptying the catalyst container, stir the mixture for a few minutes until the two are well blended. You can add in any paints or glitters into the mixture at this point too.
Replace the cover on the mixture and set it aside for the time that was recommended by the manufacturer.
Step 4. Apply the Epoxy to your flooring
To apply the epoxy, use a 3-inch paintbrush to paint the borders of the areas which might be a little difficult to access with a roller. You can use the roller to spread the epoxy everywhere around your garage floor.
Make sure to maintain the wet edge by rolling the same spots over and over again.
Once you’re done applying the coating, don’t start walking on it for at least 24 hours or more. But after the wait, you should have a brand new garage floor that will last you a lifetime!
